产品描述

东莞市瑞欣新材料有限公司

东莞市瑞欣新材料有限公司

经营模式: 生产制造

所在地区: 广东省  东莞市

认证信息: 身份认证

东莞市瑞欣新材料有限公司

手机访问展示厅

东莞市瑞欣新材料有限公司
东莞市瑞欣新材料有限公司

东莞市瑞欣新材料有限公司是颜料,塑料助剂,色母的优良生产制造厂家,竭诚为您提供全新的PET塑料透明增韧剂,PET塑料用消黄母粒 东莞瑞新颜料消黄母粒系列,尊龙人生就是搏网站打蜡黑颜料 广东黑颜料 车蜡黑颜料等系列产品。

东莞市瑞欣新材料有限公司

手机访问展示厅

首页 > 产品列表 > 功能母粒 > PET塑料脱模剂 广东塑料脱模剂

PET塑料脱模剂 广东塑料脱模剂

图片审核中 PET塑料脱模剂 广东塑料脱模剂
PET塑料脱模剂 广东塑料脱模剂

手机查看产品信息

价格 面议
起批量 25千克
供货总量 9999千克
产地 广东省/东莞市
发货期 自买家付款之日起3天内发货
数量

联系尊龙人生就是搏网站尊龙人生就是搏网站尊龙人生就是搏网站电话

朱光锐 先生
  • 133****8256

联系信息

好用又免费的采购管理软件

产品详情

尊龙人生就是搏网站提醒您:请依照化学品安全技术说明书(MSDS/SDS)进行贮存和使用,运输、使用或贮存不当可能引发人身、环境 风险。产生的危险废弃物也应交由专业机构处理。

“PET塑料脱模剂 广东塑料脱模剂”参数说明

是否有现货: 认证: SGS
类型: 功能性母料 材质: pet
等级: 注射 颜色: 透明
应用工艺: 注塑 耐晒性: 4-6
有效成分含量: 40% 参考配比量: 0.3-1%
品牌: 瑞新颜料 适合塑料品种: Pet
型号: Rx 规格: 20
商标: 瑞新颜料 包装: 20公斤|袋
添加量: 0.3-1% 产量: 9999

“PET塑料脱模剂 广东塑料脱模剂”详细介绍

          PET脱模剂(注塑)

PET脱模剂专用于防止PET产品与模具表面粘连,并能使之顺利出模而不致粘模,防止强行取出对产品造成的损伤。主要作用脱模、提高生产效率、延长模具使用寿命, 同时使产品光洁、尺寸合格、减少废品, 而需使用的 的一种加工母粒。

  1. 提高产品表面的爽滑性,降低60%的表面摩擦力和脱模阻力

  2. 提高产品表面的耐磨性降低表面刮痕和磨痕,改善表面质量

  3. 简化了PET塑料成品的加工,并能降低生产的噪声

  4. 不影响PET透明性能

PET脱模剂适用于PET,PETG改性塑料、薄膜、管材、电线电缆料、大型注塑件、薄壁复杂制件等。

PET脱模剂使用前与原料一起烘干,70度烘干3-4小时。

添加比例:0.3%-1%

包装:20KG每袋装。

 

PET release agent (injection molding)

PET release agent is specially used to prevent the PET product from sticking to the surface of the mould, and it can make the mould exit smoothly without sticking to the mould,, prolong the service life of the mould, at the same time make the product smooth and clean, qualified in size, reduce the waste, and need to use an indispensable processing masterbatch.

It can improve the smoothness of the product surface, reduce the friction force and demoulding resistance of the product by 60%, improve the wear resistance of the product surface, reduce the scratch and wear mark, and improve the surface quality.

It simplifies the processing of PET plastic products, and can reduce the noise of production without affecting the transparency of PET.

PET release agent is suitable for PET,PETG modified plastics, thin films, pipes, wire and cable materials, large injection molded parts, thin wall complex parts and so on.

The PET release agent is dried with raw materials before use, drying at 70 degrees for 3-4 hours.

Proportion added: 0.3% -1%

Packing: 20KG per bag.

内容声明:您在尊龙人生就是搏网站采购商品属于商业贸易行为。以上所展示的信息由卖家自行提供,内容的真实性、准确性和合法性由发布卖家负责,请意识到互联网交易中的风险是客观存在的。

价格说明:该商品的参考价格,并非原价,该价格可能随着您购买数量不同或所选规格不同而发生变化;由于尊龙人生就是搏网站不提供线上交易,最终 格,请咨询卖家,以实际 格为准。