树脂瓦专用超耐候ASA面膜挤出流延生产线是我司顺应市场潮流，专门针对提高PVC树脂瓦耐候性而设计制造的。ASA膜具有 的耐候性、耐化学腐蚀、耐盐雾、耐氧化、耐紫外线辐射、耐高温、耐低温、耐磨损等优点。

ASA膜与PVC树脂瓦复合能充分保护下层的PVC树脂瓦，延长PVC瓦的使用寿命；ASA膜与彩钢瓦复合，可以解决彩钢瓦易腐蚀生锈，褪色掉漆等问题；ASA膜与装饰板复合作装饰面膜，具有易清洁，耐酸碱，耐候性，环保 ，耐磨耐刮表面硬度高等特点。

本生产线采用特殊的排气式螺杆与微单拉工艺，可生产单层或多层厚度范围0.05-0.25mm的ASA膜，产品厚度、颜色均匀，纵向抗撕强度高，卷取平整，可生产亮面与哑面ASA膜。

Adapting to the new macro-environment,, chemical resistance, salt mist resistance, oxidation resistance, ultraviolet radition resistance, high temprature resistance, low temperature resistance, and wear resistance properties and so on.

The compound of ASA film & PVC resin tiles can protect the tiles sufficently and prolong the product’& steel tiles can solve the corrosion,& decorative board is of acid resistance, weather resistance, environmental, non-toxic, and wear resistance and so on.

The machine adopts special exhaust screw and little mono strengthen technology, could produce single or multi layer ASA film with shinning and matte finish , the thickness from 0.05-0.25mm, uniform of product thickness and color, vertical tear resistance, even winding.

 

设备型号：

KWJM 120-1500，KWJM110-65-1500

 

机型规格 \  Model	KWJM 120-1500	KWJM110-65-1500
螺杆直径 \ Diameter	120mm单螺杆 / Single Screw	110/65mm双螺杆 / Double Screw
加工材料 \ Material	ASA	ASA
用途分类 \ Usage	ASA膜
制品厚度 \ Thickness	0.05-0.25mm	0.05-0.25mm
制品宽度 \ Width	≤120mm	≤120mm
主电机功率 \ Motor Power	132KW	110KW/45KW
总装机功率 \ General Power	≈190 KW	≈ 220KW
机械设计线速度 \ Line Speed	≤ 60m/min	≤ 60m/min
设备外型尺寸 \ Size	20×3.5×1.8M	20×3.5×1.8 M

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

备注：以上规格参数仅供参考，根据用户具体要求配置作适当变更。

Remark: Only for your preference, and it will be changed according to actual data.

 

 

图片：

 

 

 

设备图片：81号机